Make your own free website on

Whether you’re decorating your yard or re-doing the driveway, it can be very beneficial to recognize how you can lay block paving. By taking the Do It Yourself method, you could produce exactly what you want and save yourself a reasonable amount of money– something your bank balance will probably thank you for. All you should do is get the right equipment and read this overview.

Organize How You Want It

The initial step is to choose how you desire your block paving to look. If you’re replacing old paving, just what didn’t you like concerning it? What improvements could you make? You should think of the total form, useful aspects (such as size) and pattern of the bricks. It’s additionally a good idea to consider what colour bricks will well go with your residence– you do not want anything to clash.


Next off, you’re going to intend to prepare the site. Mark out a location and dig it out, making sure to dig far enough down so that your paving will be despite the surrounding surface. For this, you need to utilise plant tools such as a miniature excavator or a JCB.

Put Down A Sub-base

Develop a sub-base to form the foundations of your block paving. Your sub-base needs to go to least 100mm thick, and it can be a good idea to put it above a layer of weed-fabric, to prevent weeds from growing through your pavement. Finish your sub-base by going over it with a vibrating place. This will squash it down and level it.

Edge Restraints For Your Block Paving

Place edge restraints to mark out the edge of your paving. They must be firm and also encouraging as the external area is the weakest part of the paving. They will also work as a quick guide for the shape of your block paving.

Start Screeding

Next, you’ll have to screed the area, including in the structures and making a rank surface area for the paving to sit on. Place about 50mm of slightly damp sharp sand down and make use of a vibrating plate once again to smooth and set. Then take down a 2nd layer, just the same as the first.

Laying Your Block Paving

Finally, you can start setting down your bricks. For the very best finish, begin at the end of an incline and move up. The joints of the bricks should overlap– much like in a wall surface– so you’ll be left with spaces that you’ll need to fill out with cuts of brick. As soon as your block paving is down and all the brick are correctly placed, sweep some kiln dried sand over the surface area. This will fill the voids in between the joints.

See, not also complicated! Block paving is really rather very easy, and could give you superb outcomes if done right. When you have actually completed, take your time to unwind and also appreciate all your effort- you deserve it! EKS Construction Cambridge