Make your own free website on Tripod.com

Posted by on July 30, 2018

Just like Any other gadget, a garbage disposal tool is prone to disposal. It is not a hard task getting to put a new garbage system. This is because you can easily follow the manual of assembling and reassembling the gadget. This article elaborates the procedure that you should use to remove the old unit and put the new one.

Getting to cut off the power been fed on the garbage unit should the first step to take. Just go to the house main switch box in order to locate the right switch. Once you switch off, you will be able to work easily.

Secondly, locate where the disposal unit is located. Start by opening the doors locking the compartment beneath your sink. You will be able to see a large cylindrical object located that below the drain. This is the unit that is up for replacement. You should take the model of the garbage disposal unit that you are removing. This will make sure that you do not purchase a gadget which will give you a hard time fitting.

Go on by removing the discharge tube. The exact pipe is the one running from the disposal side down to the ground plumbing. Make sure that you open the bolts holding the tube. This will help you easily pull out the tube.

Releasing the old disposal follows next. Look for the metallic ring. Use one arm to hold the rings and the other to twist. Put it on a rag as it has a lot of dirt.

Go on to pull out the existing mounting ring. Start by getting rid of the rubber found at the base of the ring. The rubber will get to free the ring for easy removal. After that loosen the nut joining the rest of the assembly and get to also remove the sink flange. This will make it easy to the entire system to some out. Go here https://replaceyourgarbagedisposal.com/why-you-need-it-restaurant-garbage-disposal/ for further details.

Now bring the new system that you want to install. First, start by applying plungers putty on the flange underside and hold on the new sink flange on the putty for about one minute. Go on and put together the connecting unit in the right position.

Now go ahead and join the new disposal with the mounting ring. This should be followed by connecting the wires again. Make sure that the discharge pipe fits to its designated place. Get additional info by viewing this service.

To confirm your work, first, pour water into the sink to ensure all joints are well sealed. Once you have verified that the water is flowing without leaking, it is now safe for you to put the power back on. You can go ahead and enjoy our new unit. Learn more here: https://en.wikipedia.org/wiki/Waste_management

Comments

Be the first to comment.

Leave a Reply


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

*