Make your own free website on Tripod.com

Posted by on April 2, 2019

Our client have upgrade his headlight with LED light bulb as well as HID light bulb. The Nissan Qashqai housing is designed with xenon projector, but when driving in rain day, the brightness of halogen bulb is as well dim to see the front roadway. So he make a decision to upgrade a brand-new front lights housing for his Qashqai.

The brand-new Housing consists of bi xenon projector for low beam, a pair of 5500K HID bulb, canbus Aozoom ballast as well as halogen light bulb suit with a led projector headlight retrofit for high beam. He contacted us to aid him complete the tuning.

 

  • The take apart steps were not complicated, simpler than retrofitting a projector.
  • Since the bulbs as well as projector were mounted in the housing already.
  • Yank the OEM housing off and afterwards place the brand-new one in it, the task was done.

Removed the bumper and also the original housing. It requires to be discovered that there is a wiring under the housing to repair it. When disassemble the housing, it must remove the screws of the wiring out, and screw it right into the brand-new housing.

 

We end up the tuning for one hr. The light examination is necessary to do, since the light beam pattern need to conform to the Roadway Standard. When all points were done, mounting the ballast, accumulating the bumper as well as test the light again.

 

Upgrade an entire housing instead of a projector or some bulbs, it will be easier for the green-hand. And also we do not need to fret about the quality of the aftermarket accessories such as ballast, projector and more. But, in all, no matter what you retrofit with, the risk-free roadway rules we need to conform to.

Comments

Be the first to comment.

Leave a Reply


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

*