After Apple launched the Apple Watch, it was loved by many people. But if you wear your Apple Watch for a long time, you’ll notice that many stains are already covered with Apple Watch bands. Generally, after the Apple Watch bands are discharged from the Apple Watch, wipe them with an anti-wear lint cloth covered with clean water and then dry them with a dry cloth. The Simai Apple Watch bands manufacturer will also specify how to clean Apple Watch bands in the following special circumstances.
Clean Apple Watch bands
In addition, users of apple Watch bands should pay special attention to that the leather is not waterproof, so do not place the leather bands in water or in the environment of direct sunlight or high temperature and humidity.
Remember not to use soap and other detergents
In Apple’s official cleaning guide, the body, crown and strap of the Apple Watch are all mentioned that soap and other detergents should not be used, so you should be careful and clean them with water as much as possible.
For leather watchbands:
For all other Apple Watch bands, buckles, and closed parts:
How to replace Apple Watch bands?
The method to replace apple Watch bands is simple. Just press the release button on the Apple Watch, slide out of the old band and insert the new Apple Watch bands. Of course, please do not forcibly insert apple Watch bands into the bands, as this may cause damage to the Apple Watch bands.
So how do You wear the Apple Watch? Apple’s official instruction also says that the current watch strap has a sports band and stainless steel band, the way to wear may be a little different. The way to wear the sport strap is to buckle the part of the strap on the other part of the strap with the hole, and then insert the big hole of the strap.
Of course, in the practical process, we may encounter some trouble, but it is difficult to stabilize the body. When we wear the sport strap, buckle before need to use the middle finger to support the big hole of the strap, and then use the index finger and thumb to pull out the other part, let the buckle fit the size of your wrist connected to the buckle, and then put the rest of the strap into the big hole fixed.
For the stainless steel Apple Watch bands, it’s even simpler. We just need to put the end of the band through the three-point connector on the other side of the watch body, twist it back, pull the band into place with the wrist, and then hold it with the magnet end.
The size of Apple Watch bands
The Apple Watch 1, 2 and 3 have only 38mm and 42mm to choose from. The original size of the 4th and 5th generation watches is cancelled, and two sizes of 40mm and 44mm are available for purchase. In theory, the Apple Watch has four strap sizes that fit a 38mm,40mm,42mm, and 44mm watch. There are only two types of apple watch strap available for sale: a 38mm/40mm one and a 42mm/44mm one.
The material of Apple Watch bands
For more information about Apple Watch bands, please refer to the Simai Apple Watch Bands Manufacturers. The website will update your knowledge about Apple Watch bands from time to time.