The new Housing includes bi xenon projector for low beam, a pair of 5500K HID bulb, canbus Aozoom ballast and also halogen bulb match with bi xenon projector lens for high beam of light. He called us to assist him finish the tuning.
The take apart actions were not complicated, less complex than retrofitting a projector. Due to the fact that the bulbs as well as projector were installed in the housing currently.
Tug the OEM housing off and then install the brand-new one in it, the task was done.
Removed the bumper as well as the factory housing. It requires to be seen that there is a wiring under the housing to repair it. When dismantle the housing, it should remove the screws of the wiring out, and also screw it right into the brand-new housing.
We finish the modification for one hour. The light examination is required to do, due to the fact that the light beam pattern require to abide to the Road Requirement. When all points were done, setting up the ballast, accumulating the bumper as well as test the light once more.
Upgrade an entire housing rather than a projector or some bulbs, it will be more convenient for the green-hand. And also we do not need to bother with the top quality of the aftermarket devices such as ballast, projector and more. Yet, in all, whatever you retrofit with, the safe road rules we need to abide to.
*
Be the first to comment.