Make your own free website on

Posted by on July 3, 2018

In the event that you have in your residential plumbing systems a connection to an irrigation system, you will have a serious need for the use of the backflow preventer system.  Most homeowners, if not all, use the extensive sprinkler systems to get to water their lawns and yards.  In a lot of the cases, you will hardly get a separation system that is inbuilt that will serve to separate the waters for irrigation and the potable one that you may use for other domestic uses such as cooking and the like.  This often leads to the home’s plumbing units and water supply systems remaining rather exposed to the risk of backflow, the scenario where you have water flowing back into your sprinkler systems.

As a matter of fact, the home will stand exposed to lots and lots of risks as a result of this given  the fact that the water will often be laden with traces of contaminants such as fertilizers, pesticides and herbicides.  The clean water in the professional Albuquerque cross connection systems will be quite contaminated as a result and this is certainly a serious hazard to health.  It will be well advisable for you to have installed the backflow preventers so as to help prevent the instances of such backflows.  Talking of backflow preventers, these are ordinarily preventer valves and are available of varied types and the other fact is that these all as varied as they are serve lots of different situations.  As we dig deeper, we will now see just how it is that backflows occur.

First and foremost, you need to note the fact that backflow is not a normal occurrence by any standards.  In most of the cases, the water from the municipal suppliers will flow in the normal direction as it gets into your sprinkler systems.  However, you need to note the fact that there are a number of situations that will create the risk of the reversal of the normal flow of water.  Get some of these as we have mentioned below. Learn more about Albuquerque back flow testing here.

The first is the fact of the use of a nearby fire hydrant.  The use of these will cause drastic changes in the water pressure.  Due to this, when the water is turned on back for use after the use of the hydrant, the loss of pressure that will have resulted will be a sure cause for siphoning.  The other cause of this has been that of the mains supply for water breaking.  These often cause alterations in the water gradients and as such the water may essentially get to flow back.  Installing your sprinklers in a sloppy area will as well be one other common cause for backflow.


Be the first to comment.

Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>