Nowadays, for lots of individuals, the very first point they do after acquiring a new automobile is to retrofit the front lights, it is not only for the trendy appearance but additionally for the pursuit of personality. In fact, the road light when driving currently is brighter compared to previously.
I took the bumper out off to pull the front lights off of the assemblies as well as all set for breakdown. Baked them in the stove as well as took the shadows off.
After that it was some screws in the real estate then I began to drill some tiny holes in the reduced beam headlight base.
Placed the YEAKY bi-xenon projector in the housing and examination the light on the housing. After ending up the light examination, dealt with the YEAKY bi-xenon in the real estate with steel-soil.
Seal the housing with adhesive to prevent leak. And afterwards warmth the glue in a continuous temperature level. So the headlight housing can stick to the base very closely, as well as mounted the screws at the same time.
When all the important things are mounted up to the automobile, we fit the custom-made AOZOOM quick ballast for the bi-xenon projector.
The light is brighter as well as clearer compared to I expect with the low light beam.
*
Be the first to comment.