Water Injection Pump

The growth of any industry depends on the usage of best machines. The requirement of each industry is different and optimal output is possible only with automated machines. Machines need to be maintained with regular service and some industries rely more on mechanisation. Huge machines are used in various industries and these machines have many components.

Heavy duty machines which work reliably 24*7 are used in oil and gas industry. Heavy pumps are predominantly used in power generation, chemical, water plants, etc. The existing industries can also use turnkey solutions and maximise their profits. In oil extraction industry, water flooding is done to increase pressure and it helps with more production. This water flooding is also known as water injection and it stimulates production.

The Benefits Of Water Flooding!

You will find water injection wells both on and off shore and these wells are necessary to increase oil recovery from an existing reservoir. In a normal scenario only 30% of oil is extracted but to maintain optimal extraction water injection or water flooding is used. By using this procedure oil could be extracted over a longer period of time. This is also done to prevent low pressure in a reservoir. When the oil is extracted water is replaced and this helps in maintaining the pressure in the long run.

The Most Important Component!

The needs of oil and gas industry are always changing and machines need to be upgraded. High pressure pumping is done in this industry and for this it requires water injection pumps. Corrosive fluids are pumped and these pose challenges in the industry. For efficient functioning high pressure pumps are very essential and they need to perform reliably for extended periods.

Different models are made to meet the demands of the industry. Duplex and super duplex stainless steel materials are used to make these pumps. The material used varies depending on the industry and the type of fluid used. The various types of pumps are high pressure multi stage axially split pump, high pressure diffuser style multi case pump, high pressure heavy duty double case pump and ultra-high pressure diffuser style double case pump.

All these pumps are tested and certified and they are used in different types of industries. The bearings used are best and the pumps for water injection are manufactured meeting standards set by the government. So it is a very important component in extraction and it helps in maintaining the environment.