Cerium Oxide Polishing Powder | Image Resource : 5.imimg.com
Cerium oxide is basically a rare earth compound which has been used by the craftsman for a long period of time in order to remove scratches from a glass surface. The polishing of the glass materials is also done in a very mannered way; till this day also it is being used by many professionals. The procedure that includes the polishing of glass materials is so easy that any individual can do it on their own.
There are many properties of a polishing powder; cerium oxide can actually help in removal of scratches in a very effective way. The simple glass polishing can be done with full restoration of the materials and one individual will obviously be happy with the kind of results. Many pre-mixed polishing compounds are much more expensive than the cerium oxide polishing powder; it is available at a very affordable price in the market.
The polishing powder mixes very gently with water and slurry is formed, it is very much effective. If there is a bit of slurry left over, then you should not throw it away; it can be re-used later on with adding up water to it. The restoration of the lightly scratched glass tabletops, windows etc. can be easily done with the modest skills of an individual. Headlights can also be cleared with the application of proper amount of cerium oxide.
Sometimes there are grimes on your glass or stains on the shower, which can be easily caused with the help of hard water. The problem can be solved with the appropriate use of polishing powder and cerium oxide will take care of that easily. The stains do not come off easily but cerium oxide always does its job properly. One should use a proper lint free fabric or a clean cloth in order to do the wiping on the glass surface.
There is a proper rule of thumb which says that if one can feel the depth of a scratch with the fingernail of their thumb, then only it can be considered as a light scratch. Though this problem can be solved easily with the help of cerium oxide and it is mainly caused by keys and coins. The buffing on the glass surface with cerium oxide polishing powder should be done until the slurry becomes dry enough.
*
Be the first to comment.